Solar Control Window Film VLT 43%

$24.99

SKU: WES00056

Available Now!

Trust
Icon

Trust
Icon

Self Adhesive Solar Control Window Film VLT43%

Size : W 100cm X L 200cm(2 sqm)

Material: PVC, PE

Occasion: Any Window type

Luzen&Co window films are cut and shipped upon order. Since the width is fixed, only the length can be changed according to the order quantity. Only it can be returned, if it is defective.(e.g. If order 3, W100 cm(fixed) X L 600cm roll will be sent as a long roll)

 

Product Details

Visible Light Transmittance 43.40%
Visible Light Reflectance 7.20%
Infrared Rejected 12.00%
Ultra Violet Rejection 99%
Total Solar Energy Transmittance 59.50%
Total Solar Reflectance 8.90%
Total Solar Energy Absorbance 31.60%
Total Solar Energy Rejected 32.16%
Shading Coefficient 80.00%
Scratch Resistant >2H
Structure, Thickness 1.5mil / 1ply

 

Features

- Self Adhesive : Static cling window film without glue, made of environmental friendly materials, very easy to install. Soapy water is the key ingredient, and peeling off the backing liner is necessary.

 - Heat Controlling : our window film are very effective at controlling excess heat, also does well in preventing the fading of home furnishing.

 - Blocking UV

 - Prevent secondary accidents from glass fragments due to it's safety proof function.

 - Privacy Protection : Protects privacy and improves security 

 

How to use

 1. Measure the height and width of the glass surface.

 2. Cut the film to the dimensions, leaving an extra 1 inch around all sides. You’ll be able to trim the edges down to size in the final step

 3. Thoroughly clean the surface of the glass to remove any trace of dust, grime and grease

 4. Slowly peel back the liner, remember to use A LOT of water with a few drops of mild soap mixture to soak both the adhesive side and window. Wetter is better

 5. Pick up the film by the top corners, keeping it straight and level. Place the wet film onto the wet surface.

 7. Slide a squeegee over the wet film to smooth out and press the film against the glass. Squeegee from the center moving out, pushing bubbles and wrinkles out as you go.

 8.  In one smooth, continuous motion, trim the excess film from the edges using a hard card and a knife.