Self Adhesive Safety Solar Control Clear Window Tint Film VLT 88% W 152cm
Protect your home or office with this clear safety solar control window film. Designed to hold shattered glass in place during breakage, this film offers added protection against accidents and break-ins, while also reducing harmful UV rays and solar heat.
With 88% visible light transmittance, it maintains clear visibility while offering 99% UV rejection, heat control, and enhanced safety.
Size : W 152.5cm X L 200cm(3.04 sqm)
Thickness : 4 Mil
Material: PVC, PE
Occasion: Any Window type
Luzen&Co window tint films are cut and shipped upon order. Since the width is fixed, only the length can be changed according to the order quantity. Only it can be returned, if it is defective.(e.g. If order 3, W152.5 cm(fixed) X L 600cm roll will be sent as a continuous roll)
Key Features
-
4 Mil Thickness: Strong enough to hold glass shards in place
-
Solar Control: Reduces heat gain, fading, and glare
-
Security Upgrade: Prevents injuries from shattered glass & deters break-ins
-
99% UV Protection: Blocks nearly all harmful UV rays
-
High Visibility: VLT 88% – lets in natural light while protecting your space
-
Easy to Apply: Self-adhesive for simple
-
Eco Benefit: Helps reduce cooling costs by lowering heat gain
-
Made in Korea: Premium manufacturing quality
Product Details
| Visible Light Transmittance | 88.41% |
| Visible Light Reflectance | 10.66% |
| Infrared Rejected | 10.38% |
| Ultra Violet Rejection | 99% |
| Total Solar Energy Transmittance | 86.39% |
| Total Solar Reflectance | 9.84% |
| Total Solar Energy Absorbance | 3.77% |
| Total Solar Energy Rejected | 16.00% |
| Shading Coefficient | 97.00% |
| Scratch Resistant | >2H |
| Structure, Thickness | 4mil / 1ply |
Ideal for
-
Residential homes
-
Office buildings
-
Commercial shopfronts
-
Glass sliding doors & large windows
-
Safety-conscious property owners
How to use
1. Measure the height and width of the glass surface.
2. Cut the film to the dimensions, leaving an extra 1 inch around all sides. You’ll be able to trim the edges down to size in the final step
3. Thoroughly clean the surface of the glass to remove any trace of dust, grime and grease
4. Attach one piece of tape to a corner of the film. Then use another tape of the other side of the same corner. Both tapes should be placed slightly offset. Hold onto the two over hanging tapes and press them together to grab the film’s corner tip firmly. Then slowly separate the two pieces of tape; the liner and film should easily separate.
5. Slowly peel back the liner, remember to use A LOT of water with a few drops of mild soap mixture to soak both the adhesive side and window. Wetter is better
6. Pick up the film by the top corners, keeping it straight and level. Place the wet film onto the wet surface.
7. Slide a squeegee over the wet film to smooth out and press the film against the glass. Squeegee from the center moving out, pushing bubbles and wrinkles out as you go.
8. In one smooth, continuous motion, trim the excess film from the edges using a hard card and a knife.