Premium Cream Oak Interior Vinyl Wrap Film – Self Adhesive for Cabinets, Furniture & Doors (123cm Wide)

Premium Cream Oak Interior Vinyl Wrap Film – Self Adhesive for Cabinets, Furniture & Doors (123cm Wide)

Refresh tired cabinets, furniture, doors and interior surfaces with the soft, contemporary look of our Premium Cream Oak Interior Vinyl Wrap Film. Its pale cream base and subtle vertical woodgrain create a calm, natural finish that works beautifully with warm neutrals, stone, concrete and darker timber accents.

The understated grain gives surfaces a timber-inspired look without the yellow or orange tone found in many traditional oak finishes. It is a particularly good choice for minimalist, Scandinavian, Japandi and modern Australian interiors where you want to make the room feel lighter and more spacious.

Made from premium self-adhesive PVC interior film, Cream Oak can update existing surfaces without the cost and disruption of replacing the entire cabinet, door or furniture piece. The generous 123cm width also makes it easier to cover larger surfaces with fewer joins than standard narrow contact papers.

30% Quality & Price Promise

We’re confident that our Premium Cream Oak Interior Vinyl Wrap offers outstanding value for its quality.

If, within 14 days of purchase, you find an equivalent or higher-specification self-adhesive interior vinyl wrap in the same or a substantially similar Cream Oak design advertised at a lower price by an Australian retailer, send us the product link and specifications.

Once the product and price have been verified, we’ll refund 30% of the product price you paid,

We don't just sell wallpaper; we provide a premium interior solution. We are so confident in our 0.24mm High-End Vinyl Film that we offer an industry-leading guarantee.

• Thicker & Tougher: Most competitors offer 0.1mm films. Ours is 0.24mm premium grade, making it significantly more scratch-resistant and easier to handle during installation.

• The 123cm Advantage: We provide the extra width needed for Australian standard benchtops, which most budget sellers don't offer.

• True Texture: Our deep-embossing technology creates a tactile experience that cheap, flat-printed vinyls simply cannot match.

Specifications

• Colour : Cream Oak
• Size : W 123cm X L 200cm_ 2.46 m2

• The width is fixed at 123cm. Ordered quantities are supplied as one continuous length whenever the total does not exceed the 50-metre roll limit.

  Ordering examples:

  • Quantity 1 = 123cm wide × 200cm long

  • Quantity 2 = 123cm wide × 400cm long

  • Quantity 3 = 123cm wide × 600cm long

• 
•  Only it can be returned, if it is defective.
• Thickness : 0. 24mm(More durable, Thicker than normal one)
• Material: PVC
• Place : Luzen&Co Self Adhesive Wallpaper, interior film is not a just simply for walls. These could widely use for Living room, Kitchen Cabinet, Furniture, Bedding room, Study, Kids’ room, TV Background, and Commercial
  
  

Features

• Peel and Stick type
• Deep Wood grain textured
  
• Scratch resistant
• High durability(Special surface coating)
• KC Certification(Certificate of Environment-Friendly Building Materials)
• Water and Moisture proof
• Mould proof
• Easy to Clean
• Environmentally Friendly Advanced 6 Layers 

How to Install

1. Prepare the surface. Clean it thoroughly and make sure it is smooth, stable and completely dry.

2. Repair uneven areas. Sand raised sections and use a hard-setting filler where necessary. Allow it to cure, then sand smooth.

3. Prime when required. Seal raw MDF, untreated timber, painted surfaces or metal with a compatible primer and allow it to cure fully.

4. Measure carefully. Measure the height and width of each surface and plan the direction of the woodgrain before cutting.

5. Cut the film oversized. Leave approximately 1–2cm extra on every side for final trimming.

6. Start the application. Peel back approximately 5–10cm of the release liner and align the exposed adhesive edge with the surface.

7. Apply gradually. Pull away the backing liner around 20–30cm at a time while smoothing the film onto the surface.

8. Squeegee from the centre out. Apply firm, even pressure to push air towards the edges.

9. Work around edges carefully. Use gentle heat only when necessary to soften the film around suitable curves and edges. Avoid overheating or overstretching it.

10. Trim the excess. Use a sharp blade and straight edge for a neat finish.

11. Join adjacent panels. Where a join is necessary, maintain consistent grain direction. Depending on the surface and installation method, use a neat butt join or a small overlap of approximately 0.5–1.5cm.

Small air bubbles can sometimes be released by carefully pricking the bubble with a fine pin and pushing the trapped air towards the puncture.

How Much Do I Need?

For a simple area estimate:

1. Multiply the total width by the height of the surfaces in metres.

2. Divide the total area by 2.46, because each quantity covers 2.46m².

3. Add at least 10–15% extra for trimming, grain alignment, edges and possible installation errors.

For cabinets and furniture, measuring each individual panel usually gives a more accurate result than calculating only the room's total square metres.